Nikon FT1 Mount Adapter

Nikon FT1 Mount Adapter

Add To Cart


The FT1 mount adapter allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer.
The FT1 can be used with more than 80 lenses, representing almost all the NIKKOR lenses currently on the market(*1).
It almost goes without saying that it also supports autoexposure/autofocus(*2) and vibration reduction(*3). Electronic rangefinding is available in manual focus mode.You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode(*4). 

  • *1The adapter can be used with the following F mount NIKKOR lenses, including DX lenses but excluding IX-NIKKOR lenses, lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings. AI Nikkor 20mm f/2.8, AI Nikkor 24mm f/2.8, and PC-E NIKKOR 24mm f/3.5D ED lenses can not be used.
  • *2Autofocus is available only with AF-S lenses; other lenses support manual focus only. The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only.
  • *3Available with VR lenses.
  • *4Motion Snapshots can be recorded only when autofocus is used with AF-S lenses and then only when the camera is in focus.



Mount adapter

Supported cameras

Nikon 1 interchangeable lens format digital cameras (Nikon 1 V1 supported from firmware version A 1.10/B 1.10, Nikon 1 J1 from firmware version A 1.10/B 1.10)


Approx. 61.5 mm diameter (excluding projections) x 42.5 mm


Approx. 150 g/5.3 oz

Supplied Accessories

  • Body Cap BF-1B
  • Rear Lens Cap LF-N1000

Compatible Accessories

Lens Soft Case CL-N101